About Windowed FFT
-
- interested
- Сообщения: 3
- Зарегистрирован: 25 окт 2011, 10:45
- Версия LabVIEW: 8.6
- Контактная информация:
About Windowed FFT
Hi. I am maurits. I really need a help. I have an excel data and than I use a Real FFT vi to get the frequency spectra of data/wave. Now, I want to use windowed FFT with the same excel data, but was fail. Input for real FFt is a vector, while input for windowed FFT is a point. Can someone help me how to use the excel data for input of windowed FFT?. Thank you for advance.
-
mzu2006
- doctor
- Сообщения: 2456
- Зарегистрирован: 16 авг 2008, 02:12
- Награды: 3
- Версия LabVIEW: 7.1 10 11 12
- Откуда: St-Petersburg (RU), Phila, Boston, Washington DC
- Контактная информация:
Re: About Windowed FFT
Hi, Maurits, and welcome to the forum. Please, provide the data you are using and post the code you are trying to make work.
Правила форума (Forum rules in Russian)
rm -rf /mnt/windows
rm -rf /mnt/windows
-
- interested
- Сообщения: 3
- Зарегистрирован: 25 окт 2011, 10:45
- Версия LabVIEW: 8.6
- Контактная информация:
Re: About Windowed FFT
Hi mzu2006
I attach the excel data (csv file) and the code (using real FFT.Vi). There are 2 channels. The sampling freq. is 125 Mhz.
(Please save and change the xls file to csv file for data input)
Thank you for your kind attention.
Maurits
_______
I attach the excel data (csv file) and the code (using real FFT.Vi). There are 2 channels. The sampling freq. is 125 Mhz.
(Please save and change the xls file to csv file for data input)
Thank you for your kind attention.
Maurits
_______
- Вложения
-
- Using Real FFT.vi
- (54.71 КБ) 322 скачивания
-
- Excel Data2.xls
- (2.11 МБ) 296 скачиваний
-
mzu2006
- doctor
- Сообщения: 2456
- Зарегистрирован: 16 авг 2008, 02:12
- Награды: 3
- Версия LabVIEW: 7.1 10 11 12
- Откуда: St-Petersburg (RU), Phila, Boston, Washington DC
- Контактная информация:
Re: About Windowed FFT
Windowed FFT PtByPt VI - is one of the VIs that is used to process signals as they are acquired. So, naturally, it uses 1 input for the current datapoint. One way to solve it would be to create a for loop, index your signal at the border, and feed Windowed FFT PtByPt VI single point at a time. You will get number of spectra as a result. Something like that:
Depending on your final goal there might be easier/ more effective solutions.
Depending on your final goal there might be easier/ more effective solutions.
Правила форума (Forum rules in Russian)
rm -rf /mnt/windows
rm -rf /mnt/windows
-
- interested
- Сообщения: 3
- Зарегистрирован: 25 окт 2011, 10:45
- Версия LabVIEW: 8.6
- Контактная информация:
Re: About Windowed FFT
I am sorry, I can not run the code. Could you give me more detail information about the code? (how to index the signal; how to feed more than 1000 data with a certain rate sampling of frequency; how to display the results). Sorry for giving many questions in this forum.
Thank you for your help.
Maurits
______
Thank you for your help.
Maurits
______
-
mzu2006
- doctor
- Сообщения: 2456
- Зарегистрирован: 16 авг 2008, 02:12
- Награды: 3
- Версия LabVIEW: 7.1 10 11 12
- Откуда: St-Petersburg (RU), Phila, Boston, Washington DC
- Контактная информация:
Re: About Windowed FFT
Mauritis,maurits писал(а):I am sorry, I can not run the code.
the code is posted. What prevents you from running it? Post your code.
Правила форума (Forum rules in Russian)
rm -rf /mnt/windows
rm -rf /mnt/windows
-
- Похожие темы
- Ответы
- Просмотры
- Последнее сообщение
-
- 8 Ответы
- 1940 Просмотры
-
Последнее сообщение Eugene_Eugene
-
- 4 Ответы
- 335 Просмотры
-
Последнее сообщение Artem.spb